100% comprehensive inspection
Pre-production inspection
Inspect the quality of raw materials such as cloth, accessories, fabrics, sewing threads, etc. used in production to ensure compliance with relevant standards.
Inspection during production
During the production process, QC personnel need to conduct sampling inspections on cotton products, including appearance, size, details, printing, etc.
If any problems are found during the inspection, notify the production department immediately for timely correction and adjustment.
Finished product inspection
After the production of cotton products is completed, QC personnel need to conduct a comprehensive inspection of the finished products.
The inspection content includes size, color, style, quality, etc. to ensure compliance with standards, customer requirements and market demand.
If there are any problems, notify the relevant departments in time and put forward suggestions for improvement.
Packaging and storage
After the finished product is fully inspected, it is packaged.
During the packaging process, ensure that the cotton products are not damaged or contaminated.
After packaging, it is stored as a qualified product.
| Knitted product inspection standards | |
| The customer's specific requirements must be taken seriously, such as the weight must meet the standard, there must be no color difference, the size cannot be less than the order parameters, etc. | |
| Material | Confirm that the ingredients are consistent with the customer's specifications. 100%cashmere/100% cotton/velvet/down...... |
| Flower shape/needle shape | 1. For plain-colored jersey products, only check the needle shape and pay attention to whether there is any contrasting color on the collar. |
| 2. When making twisted products, please pay attention to whether it is 2*2 twisted or 3*3 twisted. The height of the twisted product is also an important parameter. | |
| 3. Diamond grid. For Alanhua products, attention should be paid to the integrity of the collar grid and the specific size of the diamond grid. | |
| 4. Pay attention to the shape of the sleeves and body. | |
| Color | Note that yarns from different batches may have color differences, so avoid mixing products from the same batch and set. |
| Size/Dimensions | Please verify the size according to the customer's order and whether it is within the tolerance range. Do not mix up the sizes of clothes. |
| Weight | 1. Pay attention to the weight differences caused by different batches of yarn. |
| 2. Pay attention to the weight difference caused by different densities. | |
| Exterior | 1. Check whether the pattern and needle shape are consistent with those confirmed by the customer. |
| 2. No holes caused by missed stitches or thread unravelling, and no yarn hooking. | |
| 3. There are no stains on the surface of the clothes, no marks left by the stone pencil on the buttons, and the placket is not twisted, skewed, or the bottom tube is exposed. | |
| 4. The size of the collar tip and whether the collar bone is symmetrical; whether the arms, armholes, sleeve lengths, and cuff sizes are symmetrical. | |
| 5. There is no different color yarn, and the appearance problems caused by coarse yarn are dealt with as much as possible. There is no pilling on the surface and uneven mixed wool color. | |
| 6. Be sure to avoid burn marks on the collar. You can add a pad for ironing to avoid them. | |
| 7. Avoid chicken claw marks on fine-spun products and avoid polar circles during ironing. | |
| 8. Fix the tail of the zipper and have a buckle at the mouth to prevent it from being pulled off. | |
| 9. The buttonhole size should be appropriate to avoid being too large and causing it to open naturally. | |
| 10. For T-neck products, make sure the left and right collars are consistent in size and distance, and the top button is in the middle of the collar. | |
| 11. The suede surface can be adjusted according to customer requirements. Try to avoid high suede surface and make sure the fabric structure is clear. | |
| 12. The left and right straps of the eye mask should be at the same height and in one line. | |
| 13. If there is a camphor smell when the yarn is stored, have the factory process it at high temperature. | |
| Trademark/Elevator | 1. The factory quality inspection label must be removed. |
| 2. The main label and washing label must be in the correct position and direction and cannot be reversed. | |
| 3. The item number, color and size of the hanger and plastic bag sticker must match the product. | |